Check all settings with a reliable Powder Scale!!
DO NOT USE WITHOUT!!
This Powder-Chart does not represent recommended
weights of charge; it is intended as a guide only, to show the
relationship of the volumetric capacity to the various settings.
This Powder-Chart may only be used with a Universal
Charge Bar™, Model C, D, CS, DS,"C/CS" and "D/DS".
To use it with any other Model could be dangerous. DO NOT use
this chart with any other Model.
- Charges listed on this Chart are an average
of several charges
- Charges may vary due to the moisture content
of the powder, and/or operator's technique.
- All charges on the powder-chart are either
right on, or up to one half grain under-weight, in order to
provide a safety margin
- Due to the physical properties of the 800-X
Powder extreme variation in charge-weight may be as much as
one full grain
- All settings included on this chart are in
- The AL-5 , AL-7 AND X-58 - powders are not
included in this chart, because their manufacture has been discontinued.